Now showing 1 - 2 of 2
  • Some of the metrics are blocked by your 
    Item type:Publication,
    Flow Conditioning in Heat Treatment by Gas and Spray Quenching
    Gas quenching has been known for centuries as a convenient, affordable method to heat treat ferrous alloys. Heated parts are taken out of the furnace and quenched at ambient pressure, casually using a blower to increase the heat exchange. Technical developments in the metal industry, over the last decades, have seen a constant improvement of the ratio of heat exchange, e.g. by using pressured chambers, specific blowers, and a variety of gases and gas mixtures. The current gas quenching technologies are adapted to heat treatable metals found in the automotive industry, requesting a minimum heat exchange ratio, also depending on the part geometry. Little has been however investigated concerning the quenched batch, defined as the arrangement of the heated parts onto a single- or multiple-layer charge carrier. The present work, through a combination of experimental and numerical techniques, provides guidelines to adapt the batch to a specific gas flow pattern (spatial fitting), and to adapt the gas flow pattern to the batch structure (temporal fitting). Measurement techniques have been developed to assess the flow patterns inside industrial quenching chambers. Evaluated flow structures have been converted to numerical boundary conditions for extended simulations tools. Simulations have helped implementing technical solutions for flow correction in industrial gas quenching chambers. Furthermore, simulations have served the design of batches of various geometries, to improve both quenching homogeneity and intensity. Both experimental and numerical results confirmed the advantages of gas quenching for the homogeneous heat treatment of automotive steel grades, and demonstrated the potential of various flow correcting devices, such as perforated plates and cylindrical flow ducts. Heat treatment gas and spray quenching has also been integrated into the forging and the turning process chains of single components, successfully optimizing the lean process flow (automation, quality, and time), for various high-performance materials and part geometries.
    doctoral thesis
      366  182
  • Some of the metrics are blocked by your 
    Item type:Publication,
    Prozesssimulation der Bauteil-Abschreckung in flüssigen Medien: Zur Analyse des mehrphasigen Strömungs- und Wärmetransports in Siedeprozessen
    The quenching process during heat treatment of steel parts is significantly influenced by boiling phenomena. At wall temperatures above the liquid boiling point, the vapour formation and the interaction of the vapour phase with the liquid flow field is determining the local cooling conditions of the workpiece. High temperature gradients can result in an inhomogeneous distribution of the final material properties (e.g. hardness). A multiphase flow and heat transfer model is utilized to simulate the local flow field and the resulting cooling conditions during quenching. The applied bubble-crowding approach is able to investigate the different boiling phases within one single numerical model. Simulation results of the transient cooling of cylindrical specimens in an axial water flow are discussed for various flow velocities and liquid subcoolings and are compared to experimental results. The determined heat transfer coefficients are utilized to calculate the phase transformation and the surface hardness within a material simulation approach, so that the result of the quenching process with respect to the initial liquid flow conditions can be predicted.
    doctoral thesis
      323  152