MAPEX Center for Materials and Processes
Loading...
Country
DE
City
Bremen
149 results
Filters
Settings
Now showing 1 - 10 of 149
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Numerical simulation of a bilayer organic solar cell based on boron chromophore compounds as acceptors(IEEE, 2020-12-17); ; ; ; Organic solar cells fabricated with non-fullerene acceptors have proven to be a solution to reduce manufacturing costs. Besides the material selection, another way to reduce such costs is by optimizing the properties of both the materials and the interfaces which in turn would contribute to enhance the solar cells efficiency. This can be done with numerical simulations. Among non-fullerene materials, boron chromophores are relatively stable and chemically versatile compounds which have been usually used as donors in solar cells. In this work, planar solar cells based on PTB7 and boron compounds are proposed and simulated but by using the latter as acceptors. Specifically, we show the functionality of our proposed devices by analyzing the variation of both the Lowest Unoccupied Molecular Orbital (LUMO) and the influence of the non-intentional doping of the boron compounds with regard to the photovoltaic parameters of the solar cells. The properties of the materials such as the dielectric constant, energy levels, and non-intentional doping are taken from literature. We show that there are optimal values for LUMO and doping concentration to maximize the device efficiency. The causes of this behavior are analyzed using band diagram simulations.conference paper55 49 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, En route towards a comprehensive dimensionless representation of precipitation processesPrecipitation of (nano-) particles is a unit operation for the preparation of suspensions. Despite its widespread use, no general understanding is established of how different operating conditions, such as mixing rates or reactant concentrations, affect the precipitation outcome (e.g. the particle size distribution). We obtain overarching relations between the operating conditions and the precipitation outcome by deriving dimensionless numbers governing the precipitation process. In particular, we consider the interdiffusion of two chemical compounds reacting to a sparingly soluble salt by coupling the reaction–diffusion equations for the solute concentrations, to a population balance equation for the evolution of the dispersed phase including nucleation and growth. We vary the relevant process parameters for different chemical systems and uncover three dimensionless numbers, which fully determine the precipitation outcome under the assumption of fast chemical reactions. Two of these dimensionless numbers are Damköhler numbers, which put the relevant mixing kinetics in relation to the relevant time scales for the nucleation and the growth kinetics, respectively. The third dimensionless number corresponds to a dimensionless solid concentration. Simple functional expressions for the Damköhler numbers valid for any chemical system allow estimating whether the precipitation product is controlled by mixing, or solely by the kinetics of solid formation. In the mixing-controlled regime, scaling laws relate the mean particle sizes and the number of particles to the Damköhler number.journal articleBand:42872 92 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Macro/mesoporous SiOC ceramics of anisotropic structure for cryogenic engineering(Elsevier, 2017-09-01); ; ; ; Macro/mesopore SiOC ceramic monoliths of anisotropic structure were prepared by freeze casting, using methy phenyl polysiloxane (H44) or methy polysiloxane (MK) and (3-aminopropyl)triethoxysilane (APTES) as precursors. Influence of pyrolysis and testing temperature on compressive strength was investigated. Monoliths pyrolyzed at 700 °C had the highest compressive strength both at 77 K (14.0 ± 4.3 MPa) and 293 K (7.7 ± 1.8 MPa), regardless of precursors. Compressive strength of monolith in parallel direction is around twice as much as perpendicular direction. Compressive strength of both monoliths in liquid nitrogen (77 K) was around twice of that in air (293 K) probably due to low temperature and liquid resistance. Anisotropic expansion was observed, and the shrinkage in parallel direction was almost twice of that in perpendicular direction, which can be verified by the Schapery equation. Monolith made from H44 showed a much higher coefficient of thermal expansion at 77 K than monolith made from MK and APTES, probably due to difference in composition and measurement condition. Thermal conductivities and specific heat capacities displayed an upward trend from low to warmer temperature. The minimum and maximum values for thermal conductivity are 0.2 and 1.2 W m− 1 K− 1. The maximum heat conductivities might be determined mainly by the macroporosity and the thermal conductivity of the hybrid material.journal articleBand:13497 128 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, In-Process Tool Deflection Measurement in Incremental Sheet Metal FormingIncremental sheet forming is an economical alternative to deep drawing for forming large sheets in small quantities. However, the shape deviations resulting from a process-force-caused tool deflection limits the measuring accuracy. Therefore, an optical multi-sensor system is proposed to enable the contactless in-process measurement of the tool deflection independent of the machine kinematics for the first time. The presented design study of the sensor system aims to meet the requirement of a maximal measurement uncertainty of 15 µm at a measuring distance of up to 2 m. The multi-sensor system consists of a large number of inexpensive angulation sensors, each of which measures an angle to a light source on the tool. Based on the measured angles of all sensors calibrated to each other, the position of the tool in the three-dimensional manufacturing volume can be calculated by multi-angulation. Via experimental characterization of a realized angulation sensor as well as an uncertainty propagation, the measurement uncertainty achievable with the overall system is estimated. As a result, the multi-sensor concept fulfills all requirements for the measurement of the tool deflection in incremental sheet metal forming.conference paper57 84 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Computational modeling of a ventilation concept for a lunar habitat laboratoryHuman spaceflight demands systems like habitats that provide a livable environment for humans on long duration missions on other planets. This challenge includes the layout of several life support subsystems according to comfort criteria, including air management and the ventilation of supply air. A main goal of the ventilation system is to ensure a comfortable room climate with fresh air while being able to remove waste heat of other habitat systems. In this project we propose a ventilation distribution for a habitat laboratory using the design of MaMBA (Moon and Mars Base Analog) as an example geometry. We evaluate its performance with different exhaust configurations and boundary conditions via numerical simulations with OpenFOAM 6s’ buoyantBoussinesqPimpleFoam solver. Comfort criteria are set according to literature values to ensure a good mixing of the supply and ambient air with a low probability of uncomfortable drafts. First results showed that a cooling system with only one cooling loop, the room ventilation, does not provide an acceptable solution. Therefore a secondary cooling loop, rack ventilation, is proposed. It absorbs the heat of the electrical devices like the scientific instruments, inside the racks, and releases heated air at the rack's bottom in the direction of the room exhaust vents. The combination of two cooling loops can fulfill most of the comfort criteria and should therefore be integrated in the design of the habitat's ventilation system.journal articleBand:9Heft:249 29 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Relationship between the VOC Tuning Effect and the Interface Activation Energy Due to the Third Component Concentration in Ternary Organic Solar Cells(American chemical society, 2022-04-08); ; ; ; The open-circuit voltage (VOC) tuning effect due to the variation of the low concentration of the third component in ternary organic solar cells has been mainly attributed to interfacial phenomena. Up to date, the models reported in the literature to analyze such interfacial phenomena are based on optical characterization. In this work is proposed a different approach to study such a VOC tuning effect by using dark-current characteristics at different temperatures. Specifically, for PTB7-Th:PC71BM:ICBA-based solar cells, it is found that an increment of the third component concentration, that is, the fullerene ICBA, causes an increase in the activation energies (Ea) in an Arrhenius-type curve. This, in turn, decreases the reverse saturation current (J0) of the devices, thereby incrementing their VOC.journal articleBand:5Heft:442 59 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, The impact of metal doping on fumed silica structure and amino acid thermal condensation catalytic properties(Springer, 2021-08-18); ; ; ; Fumed silica nanoparticles (FSN) are one of the most common synthetic forms of silica, but prolonged exposure leads to cell toxicity and apoptosis due to reactive oxygen species (ROS) generation and cell membrane perturbation resulting from hydrogen bonding and electrostatic interactions. Increasing attention is being put on synthesizing FSN material that is safer both for workers involved in large-scale industrial production, and consumers coming in contact with FSN additives. In the present work, we explore the molecular structural differences and efficacy of Al- and Ti-metal-doped FSN which has previously been shown to reduce toxicity effects of FSN. We use a combination of 29Si and 27Al solid-state magic angle spinning (MAS) NMR, Raman spectroscopy, and thermogravimetric analysis (TGA) to probe the surface and bulk structure and quantify the adsorption capacity and reactivity of the metal-doped FSN with respect to amino acid thermal condensation. Alanine was selected as the amino acid of choice for its simplicity and ubiquity in biochemical reactions. The results indicate that metal doping has a modest impact on the fumed silica molecular structure with a small decrease in amino acid adsorption capacity and thermal condensation reactivity as a function of increased metal doping.journal articleBand:5644 82 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Doped samarium oxide xerogels for oxidative coupling of methane - Effects of high-valence dopants at very low concentrations(Elsevier, 2021-04-01) ;Jones, Andrew S. ;Aziz, Daniel; ; Hagelin Weaver HelenaThe effects of high-valance dopants on the catalytic properties of samarium oxide xerogels were investigated at concentrations of 0.1 and 1.0 % (by mol) in the oxidative coupling of methane (OCM). Gd, Y, Zr, and V dopants were selected to examine the influence of oxidation states between +3 and +5 on the OCM performance. Even at these low loadings, the high-valance dopants were observed to have a significant impact on the OCM reaction. At the lowest loading, 0.1 mol %, and below 700 °C, all dopants improved the activity over that of the pure Sm2O3 xerogel, and most also improved the selectivity. In particular, the ethylene yield was significantly improved over these catalysts between 500 and 700 °C. However, the stability of the doped catalysts compared to the undoped Sm2O3 xerogel were inferior above 700 °C, and the higher concentration (1.0 mol %) resulted in catalysts with a lower stability. Time-on-stream experiments revealed that the 0.1 mol % high valence dopants improved the stability of the Sm2O3 xerogel at 700 °C. As a result of the higher stability, the doped catalysts retain more of the original specific surface area and appear to stabilize the more active cubic Sm2O3 phase compared with the undoped catalyst. Therefore, the doped catalysts have a higher number of available basic sites during reaction. This study reveals that high-valence dopants have potential to improve the low temperature (500–700 °C) activity of OCM catalysts. However, the concentrations must be kept very low, as dopants that increase the activity and selectivity at concentrations of 0.1 mol % can result in inferior catalysts at 1.0 mol %, and temperatures above 700 °C must be avoided or rapid deactivation can occur.journal articleBand:36533 47 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Nitrile‐Substituted 2‐(Oxazolinyl)‐Phenols: Minimalistic Excited‐ State Intramolecular Proton Transfer (ESIPT)‐Based Fluorophores(Royal Society of Chemistry, 2020-05-04); ; ; Herein, we present minimalistic single-benzene, excited-state intramolecular proton transfer (ESIPT)-based fluorophores as powerful solid-state emitters. The very simple synthesis gave access to all four regioisomers of nitrile-substituted 2-(oxazolinyl)-phenols (MW = 216.1). In respect of their emission properties they can be divided into aggregation-induced emission enhancement (AIEE) luminophores (1-CN and 2-CN), dual state emission (DSE) emitters (3-CN) and aggregation-caused quenching (ACQ) fluorophores (4-CN). Remarkably, with compound 1-CN we discovered a minimalistic ESIPT-based fluorophore with extremely high quantum yield in the solid state ΦF = 87.3% at λem = 491 nm. Furthermore, quantum yields in solution were determined up to ΦF = 63.0%, combined with Stokes shifts up till 11.310 cm−1. Temperature dependent emission mapping, crystal structure analysis and time-dependent density functional theory (TDDFT) calculations gave deep insight into the origin of the emission properties.journal articleBand:8Heft:2742 45 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, An evaluation of colloidal and crystalline properties of CaCO3 nanoparticles for biological applicationsBiodegradable calcium carbonate carriers are a promising and safe nanoparticle platform which might enable various applications as an engineered nanomaterial in health care, food and cosmetics. However, engineered nanoparticles can exhibit new forms of toxicity that must be carefully evaluated before being widely adopted in consumer products or novel drug delivery systems. To this end, we studied four common calcium carbonate particle systems (calcite nanoparticles, amorphous sub-micrometer and vaterite sub-micrometer and micrometer particles) and compared their behavior in biological medium and in cell culture experiments. The thermodynamically stable calcite phase is shown to maintain its morphological features as no phase transformation occurs. Size- and time-dependent phase transformation of the less stable vaterite particles are observed within 96h in cell medium. The protein serum albumin can be an effective inhibitor of phase-transition and it is shown to improve colloidal stability. The impact of the biological environment goes beyond protein-corona formation, as we observed rapid dissolution of amorphous particles in high ionic strength cell medium, but not in Millipore water. Cellular responses of human osteoblasts against CaCO3 particles indicate that increased intracellular calcium ions improve viability and that particle internalization is not size-dependent. Useful insights for designing CaCO3-based delivery systems are provided and also corroborate to the idea that intrinsic material properties as well as environmental conditions are of relevance for the successful implementation of dispersed CaCO3 particles in drug delivery systems and in other applications.journal articleBand:78103 218
