Brandes, ChristophMegne Tague, Armelle CathyKroll, StephenTreccani, LauraRezwan, Kurosch2023-10-202023-10-202016-01-2002728842https://media.suub.uni-bremen.de/handle/elib/7346https://doi.org/10.26092/elib/2602In this study an easy-to-use ceramic processing technique based on temperature-controlled ionotropic gelation of alginate is presented. This method is the breakthrough for simultaneously large scale tape casting and high quality patterning of thin ceramic tapes. Alumina powder (d50¼ 205 nm) is used to cast flexible and on demand shapeable tapes. Compared to conventional ceramic micropatterning, ionotropic gelation combines complexity of the patterned structure over large-scale areas, a high pattern resolution down to sub-mm regime (400 nm) and tape thickness below 300 mm. Obtained green and sintered (1350 1C) micro- and sub-micropatterns are characterized by SEM and quantitative 3D-profilometry focusing on both, pattern quality and pattern aspect ratio. The results show that reproducible thin ceramic tapes featuring positive and negative patterns maintain their aspect ratios after demolding, drying and sintering. This processing route represents a versatile tool for designing tailored ceramics for e.g. microelectromechanical engineered systems, biomaterial or microfluidic applications.9enCC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)https://creativecommons.org/licenses/by-nc-nd/4.0/Gel castingFlexible ceramic tapeMicropatterningHigh-precision pattern-contour3D-surface profilometry620Artikel/Aufsatz10.26092/elib/2602urn:nbn:de:gbv:46-elib73465