Tracht, Kirsten
Loading...
Preferred name
Tracht, Kirsten
Official Name
Tracht, Kirsten
Alternative Name
Tracht, K.
ORCID
GND
8 results
Now showing 1 - 8 of 8
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, The impact of wear, contamination and substrate conditions on the pull off force of adhesive microstructures in relation to sustainable manufacturingMushroom shaped adhesive microstructures (MSAMS) provide the potential to grasp a wide variety of objects with minimal energy usage and are therefore particularly interesting for an automated and sustainable production. Investigating the influence of wear, contamination and substrate surface conditions on the adhesive force is crucial to assess their usability in non-laboratory conditions. In this work, the pull off force of MSAMS on additively manufactured specimens is measured during multiple cycles. The results show, that different surface finishes can lead to major changes of the resulting adhesive force. Adhesion is prevented by particle contamination but can be restored by cleaning.conference paper54 36 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Ability-based assistance in complementary task planning for personalized human-robot collaboration(2026-05-26); Understanding how assistance works is crucial for allowing humans and robots to collaborate as a team. This paper proposes ability-based assistance, in which assistive actions provide resources and information or adjust the context, thereby affecting the task’s required ability or recontextualizing the actor’s ability, thus enabling task completion. This concept is implemented in Planning Domain Definition Language (PDDL) and applied in task planning for collaborative assembly. The demonstration using four personas, including disabled and injured ones, shows that the framework is able to integrate assistance into task allocation and generate an optimal plan tailored to each individual’s abilities.text::conference output::conference proceedings::conference paper57 54 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Analyzing the effects of time lags on the makespan of a job shop production(2026-05-26) ;Lüskow, Ben ;Pleier, Florian ;Schilp, JohannesThe complexity of manufacturing companies' supply chains leaves them vulnerable to disruptions which often result in time lags such as supply delays and machine failures. This paper analyzes the effects of time lags for a job shop production, a typical production structure for environments with a high product variability. To determine these effects, the makespan is measured using discrete-event simulations. The results demonstrate that time lags increase the makespan of a job shop production in a nonlinear manner depending on the time lag duration and the number of affected elements.conference paper21 22 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Finite element modelling of single dry-adhesive microstructures with a hyperelastic material model(Elsevier, 2025); ; ; ; Dry-adhesive microstructures made of silicone are an energy efficient tool for pick-and-place tasks with a diverse range of objects. Small-scale experiments with less than 50 individual adhesive elements provide the database for finite element modelling of single adhesive elements using a hyperelastic material model. Through experimental investigations and numerical parameter identification, a finite element simulation with a Neo-Hookean model was developed. The simulation could successfully describe the deformation during the compression phase. However, for the pulling phase a more complex material model, such as the Mooney-Rivlin or Ogden model in combination with a better representation of the incompressibility, is required.conference paper81 49 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Releasing kinematics for energy efficient grippers based on dry-adhesive microstructuresGrippers based on mushroom shaped adhesive microstructures provide the potential to grasp a wide variety of objects with minimal energy usage. Once a sufficient contact is established, the adhesion is maintained without any further energy input. This is advantageous in terms of energy efficiency but can impede the process of releasing gripped objects if the adhesive force surpasses the weight force. Starting from mechanical releasing principles, two concept designs for dry-adhesive based grippers were developed. Experimental tests with simplified setups could prove the significant reduction in detachment force that is achieved by levering or rolling off the dry-adhesive tape.conference paper63 37 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Dynamic Analysis of Process Chains as an Enabler for the Adaptive Process Planning(2007); ; Previous studies have proposed a deeper integration of process planning and production control in order to achieve higher levels of efficiency and reconfigurability in production. Nevertheless, a solid method to support the delicate decision making during reconfiguration phases is still missing. Thus, today mostly traditional, static process plans are still in use in companies. In this paper, an approach for dynamical evaluation of process chains based on a multicriteria analysis is introduced. The method constitutes a module within a wider framework for adaptive process planning. The theoretical approach as well as a first implementation of the framework is presented.journal article94 67 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Failure probability prediction based on condition monitoring data of wind energy systems for spare parts supply(Elsevier Science, 2013-04-28); ; ; ; The feasibility of maintenance processes relies on the availability of spare parts. Spare part inventory planning is capital intensive. It is based on demand forecasting, which possesses a high potential in reducing inventories. Even if condition monitoring systems are installed in technical systems, condition monitoring information is barely used to predict the failure probability of units. Therefore, an enhanced forecast model, which integrates SCADA information, has been developed. This leads to more accurate spare part demand forecasts. The approach presented in the paper is based on data mining, the proportional hazards model (PHM) and a binomial distribution. It has been validated with maintenance data of wind energy systems.journal articleBand:62Heft:187 129 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Trend-specific clustering for micro mass production of linked parts(Elsevier Science, 2018-07-10); ; ; ; In micro production, small tolerances, as well as size effects increase the requirement for a fast, precise, and reliable methodology that enhances the output of assemblies. In contrast to conventional approaches, a widening of the tolerance field enables an overall improvement of the output of a process chain while assuring functionality of parts. Therefore, the consideration of trends for building sections is essential for increasing the outcome by identifying sections that can be matched. This paper presents the Linked Parts Clustering Algorithm for the identification of trend-specific clusters in linked parts and demonstrates the area of application.journal articleBand:67Heft:1112 123
